• <s id="vagtg"><dfn id="vagtg"></dfn></s>

    1. <bdo id="vagtg"></bdo>
      <tbody id="vagtg"></tbody>
    2. 產品資料

      iCP 阿法拉伐泵 alfalaval衛生泵

      如果您對該產品感興趣的話,可以
      產品名稱: iCP 阿法拉伐泵 alfalaval衛生泵
      產品型號: SOLIDCL-2
      產品展商: ALFALAVAL阿法拉伐
      產品文檔: 無相關文檔

      簡單介紹

      iCP 阿法拉伐泵 alfalaval衛生泵 是一款針對較低應用要求的**競爭力的解決方案,同時也是標準液體、公用設施和CIP應用的理想之選。該款離心泵堅守阿法拉伐一貫的質量承諾,確??煽?、安全的生產,且易于維護。 i-CP100離心泵在設計上秉持衛生理念,符合EHEDG要求,自帶橡膠部件均符合FDA要求。 *高流速:85立方米/小時 *大入口壓力:400 kPa。


      iCP 阿法拉伐泵 alfalaval衛生泵  的詳細介紹

      iCP 阿法拉伐泵 alfalaval衛生泵 商品詳細介紹

      離心泵




       

      離心泵i-CP100

      阿法拉伐 i-CP100離心泵是一款針對較低應用要求的**競爭力的解決方案,同時也是標準液體、公用設施和CIP應用的理想之選。該款離心泵堅守阿法拉伐一貫的質量承諾,確??煽?、安全的生產,且易于維護。

       i-CP100離心泵在設計上秉持衛生理念,符合EHEDG要求,自帶橡膠部件均符合FDA要求。

      • *高流速:85立方米/小時
      • *大入口壓力:400 kPa(4巴)
      • 接觸液體部件的材質:不銹鋼1.4403(304L) alfalaval阿法拉伐衛生泵,LCP iCP 阿法拉伐泵 alfalaval衛生泵

      iCP 阿法拉伐泵 alfalaval衛生泵 采用同一尺寸的機械密封,與LKH 單端面機封一致。
      SolidC標準工況衛生離心泵:

      標準設計:
       

      SolidC泵適用于標準負載應用領域,適用CIP(原位清洗)解決方案、公用事業、水(處理、加熱、冷卻)、洗衣機、工作范圍內的流體輸送等。
      SolidC適用在食品、奶制品、飲料、個人護理用品、制藥、精細化工和水工業使用。
      標準設計:
      SolidC泵由標準電機、短軸、機械式壓緊聯軸節、接頭、支承板、葉輪、泵蓋和軸封組成。alfalaval阿法拉伐衛生泵,LCP iCP 阿法拉伐泵 alfalaval衛生泵

       
       
      SolidC 性能
      限于已經驗證的應用領域:奶制品、CIP供水和葡萄酒。
      SolidCL Pump
      Applications
      The SolidCL pump is designed for standard duty applications, like
      pumping CIP (Cleaning In Place) solutions, utilities, water (processing,
      heating, cooling), washing machines, simple transport duty within
      working range. SolidCL is suited for use in the food, dairy, beverage
      and water industries.
      Standard design
      The SolidCL pump consists of a standard motor, stub shaft,
      mechanical compression coupling, adaptor, back plate, impeller, pump
      casing and shaft seal.
      The SolidCL pump is designed for CIP with emphasis on large internal
      roundings and cleanable seals.
      SolidCL has a stainless steel shroud for protection of the motor, and
      the complete unit is supported on four adjustable legs.
      Shaft seals
      The SolidCL pump is equipped with either an external single or a
      flushed shaft seal. Both have stationary seal rings in acid-resistant steel
      AISI 329 with sealing surface in silicon carbide and rotating seal rings in
      carbon. The secondary seal of the flushed seal is a long lasting lip seal.
      Materials
      Productwetted steel parts: . . . . . . . . .Acid-resistant steel 1.4403
      (304L).
      Other steel parts: . . . . . . . . . . . . . . .Stainless steel 1.4301 (304).
      Finish: . . . . . . . . . . . . . . . . . . . . . .Blasted (standard)
      3A polishing (Ra 0.8).
      Productwetted seals: . . . . . . . . . . . .EPDMrubber (acc. to FDA).
      Technical data
      Max. inlet pressure: . . . . . . . . . . . . .400 kPa (4 bar).
      Temperature range: . . . . . . . . . . . . . .-10°C to +120°C (EPDM).
      Flushed shaft seal (FSS):
      Water pressure inlet: . . . . . . . . . . . . .max. 100 kpa (1 bar).
      Water consumption: . . . . . . . . . . . . .0.25 -0.5 l/min.
      Connections for FSS:
      R 1/8" (BSP) external thread.
      Motor
      Foot-flanged motor according to the IEC metric standard (EFF II), 2
      poles = 3000/3600 rpm. at 50/60 Hz, IP 55 (with drain hole with
      labyrinth plug), insulation class F.
      Voltage and frequency
      3 ~, 50 Hz, 220-240V Δ/380-420VY ≤ 4 kW
      3 ~, 60 Hz, 250-280V Δ/440-480VY ≤ 4.6 kW
      3 ~, 50 Hz, 380-420V Δ/660-690VY ≥ 5.5 kW
      3 ~, 60 Hz, 440-480V Δ ≥ 6.4 kW
      Motor sizes
      50 Hz: 1.1, 1.5, 2.2, 3, 4, 5.5, 7.5, 11, 15, 18.5 kW
      60 Hz: 1.3, 1.75, 2.5, 3.5, 4.6, 6.4, 8.6, 12.5, 17, 21 kW.
      Warranty
      Extended 3-years warranty on the SolidCL Centrifugal Pump range.
      The warranty covers all non wear parts on the condition that genuine
      Alfa Laval Spare Parts are used.
      OC TOB E R 2008
      Options
      A. Impeller with reduced diameter.
      B. Motor for other voltage and/or frequency.
      C. 1500 rpm. motor.
      D. Flushed shaft seal.
      E. Product wetted seals of Nitrile (NBR), Fluorinated rubber (FPM)
      or FEP.
      F. Rotating seal ring of Silicon Carbide.
      Ordering
      Please state the following when ordering:
      - Pumpsize.
      - Connections.
      - Impeller diameter.
      - Motor size.
      - Voltage and frequency.
      - Flow, pressure and temperature.
      - Density and viscosity of the product.
      - Options.
      Note!alfalaval阿法拉伐衛生泵,LCP iCP 阿法拉伐泵 alfalaval衛生泵
      For further details, see also ESE00232.
      This product has EHEDG certification.
      SOLIDCL
      alfalaval阿法拉伐衛生泵,LCP iCP 阿法拉伐泵 alfalaval衛生泵.
       
       
      產品留言
      標題
      聯系人
      聯系電話
      內容
      驗證碼
      點擊換一張
      注:1.可以使用快捷鍵Alt+S或Ctrl+Enter發送信息!
      2.如有必要,請您留下您的詳細聯系方式!

      蘇公網安備 32011502010768號